share it
29
2023-06During EDM, the corner loss is the largest, and the size of the corner loss determines the electrode life. Because the final processing wheel is determined by the electrode loss at the corners and edges of the electrode, if the weakest part of the electrode can…
29
2023-06Graphite electrode is made of petroleum coke and pitch coke as raw materials. It is then placed in a graphitization resistance furnace with a temperature of 2273 ~ 2773K and graphitized to make a graphite electrode. The graphite electrode is divided into the fo…
29
2023-06Graphite electrode is a consumable material in the process of iron and steel smelting. When the electric furnace makes steel, the graphite electrode conducts electricity and generates heat. Finally, the waste steel is heated to molten steel, and its mission is …
29
2023-06Copper material is a non-renewable resource, the price trend will become more and more expensive, and the price of graphite material will stabilize. In recent years, the price of copper materials has continued to rise, and major graphite manufacturers have cont…
29
2023-06The graphite material has good adhesiveness. The electrode can be milled by using a conductive adhesive to bond the graphite to the fixture, and the electrical discharge processing can be omitted. The process of screw holes in the electrode material can be omit…
29
2023-06Graphite materials have good machining performance, cutting resistance is only 1/4 of copper, and under the correct processing conditions, milling graphite electrodes is 2 to 3 times more efficient than copper electrodes. The graphite electrode is easy to clear…
29
2023-06Graphite material has a lower density than copper, and graphite electrodes of the same volume weigh only 1/5 of copper electrodes. It can be seen that the electrode with a large volume is very suitable to use graphite material, which greatly reduces the load of…
PRODUCT
